2238 Florida Ave. So.
Minneapolis, MN 55426
952-546-6686

Your expert for standard and custom tape applicators and web handling solutions for 37 years
Home Services Spare Parts Contact Us Find Us - Maps Site Map

Tape Applicators For Envelopes & Packaging & Custom Applications

Back To Home

T646 Tape Application Systems
T646 Automatic Feeder System
Model T-653 Continuous Laminator
Model T-627 Flat Surface Tape Applicator
Model T-626 Heavy-duty Flat Surface Tape Applicator
Level Wound Powered Unwind (For Tear Strip Tape)
Model UC-2 & UC-5 Universal Controllers
SD-40 Tape Application System
Model VW-1000 High Speed Vacuum Wheel Tape Applicator

Contact Us For Information

T646 Tape Application Systems

Consistent tape placement at reduced cycle time

 

T646I
T646I Application System
 for product from 2¼" to 18"

T646WI
T646WI Application System
 for product from 2¼" to 30"

T646 Application Systems semi-automatically apply strips and/or spots of many adhesive transfer and double-coated tapes to flat surfaces.

Features of both application systems include the following:

  • Product conveying speed 75 ft/min.

  • Accommodates product up to 1¼" thick.

  • Accommodates ½" to 1" wide tape.

  • Two heads standard; accommodates up to four tape heads.

  • Individual tape head programming.

  • 32 character fluorescent two-line display.

  • Displays characters in English, French or Spanish.

  • Displays numbers in inches or millimeters.

  • Product batch count

  • 115v/230v, 50/60 Hz power input capability

Back To Top


T646 Automatic Feeder System

T646F Automatic Feeder System mounts directly to the T646I

 

T646F

T646I Application System
 for product from 2¼" to 17"

 

T646 Application Systems semi-automatically apply strips and/or spots of many adhesive transfer and double-coated tapes to flat surfaces.
 

Features:

  • Accommodates product up to 17" wide.

  • Provides continuous top load of product.

  • Accommodates flexible product up to 1/8" thick.

  • Helps increase productivity

 

Back To Top


Model T-653 Continuous Laminator

The Straub Model T-653 Continuous Laminator is designed to continuously laminate pressure sensitive tapes.  The spring-loaded rubber applying roller laminates and buffs the tape to product. 

Product Specifications

Tape roll diameter:   14" Max.
Tape Application: Determined by product speed
Tape Width: 1" (25 mm) maximum

Custom tape widths and applications are available.

Back To Top


Model T-627 Flat Surface Tape Applicator

The Straub Model T-627 is an economical solution for moderate speed, medium-duty application requirements.  Intermittent and continuous applications of tape can be applied.

Product Specifications

Tape roll diameter:   18" Max.
Tape Application: 250 ft/min - Max Depending on the tape and product
Tape Width: 1/4" - 1"  T-627-1
3/4" - 2"  T-627-2

Custom tape widths are available.

Back To Top


Model T-626 Heavy-duty Flat Surface  Tape Applicator

The Model T-626 Heavy Duty Flat Surface Tape Applicator is designed to apply pressure sensitive tape to containers, packages or products for higher speed and more demanding applications.

Product Specifications

Tape roll diameter:   18" Max.
Tape Application: 350 ft/min - Max Depending on the tape and product

Tape Width:

1/4" - 1"  T-626-1
3/4" - 2"  T-626-2

Wider models are available.

Back To Top


Level Wound Powered Unwind (For Tear Strip Tape)

Tape Specifications

Tape roll size: 15" OD x 6" high - 6" ID x 7" long core
Tape width: 3/32" - 1" wide on a level wound roll
Application Speeds: Up to 350 ft/min.

Also available in a T-627 version.

Can be used with Model UC-2 or UC-5 Controllers

Tape Specifications

 Tape roll diameter:  15" OD x 6" high - 6" ID x 7" long core
 Level Wound Roll:  3/32" - 1" wide on a level wound roll
 Unwind Speeds:  500 ft/min. max.
 (Custom units available up to 1000 ft/min

Also available in horizontal supply shaft and non-powered as well as other custom versions.

 

The T-626-1 Flat Surface Tape Applicator with powered level unwind is designed to apply various lengths of pressure sensitive tear strip tapes to overnight envelopes or corrugated products.  This tape applicator can be mounted over a moving product or conveyor or used on custom designed taping equipment designed and built by Straub.

Back To Top


Model UC-2 & UC-5 Universal Controllers

The Straub Model UC-2 (shown) or UC-5 controller can operate up to two or five applicators respectively to control the tape starts and cuts and switch control between multiple heads.  (Tape low attachments are required for switching).
Product Specifications
  • Operator data entry interface to adjust starts and lengths
  • Speed compensation for continuous web applications
  • Stitching option for multiple tapes and gaps
  • Can be used in a continuous mode for two (UC-2) or four (UC-5) applicators
  • Can be setup to switch between two heads run in tandem
  • Without encoder, apply and cut sensors can be provided for up to five heads (UC-5)
  • Electrical – 120/240 VAC, 1 Ph., 50/60 Hz.
  • Quick-disconnects on all sensors and applicators
  • Size – 10” wide x 12” high x 8.5” deep

Back To Top


SD-40 Tape Application System
 

Features:

  • Material handling can be supplied for a wide variety of products.

  • Systems can be supplied with Model T-626 or T-627 applicators.

  • Custom material feed systems are also available.

  • Our taping specialists will provide solutions for your tape applying applications.

Back To Top


Model VW-1000 High Speed Vacuum Wheel Tape Applicator

The Straub Model VW-1000 Vacuum Wheel Tape Applicator applies intermittent pieces of pressure sensitive-tape to individual products or webs.

Back To Top


Home • Services • Spare Parts • Contact Us • Find Us - Maps • Site Map
Copyright © Straub Design Company, Last Updated April 5, 2010